Malone MicroSport Low Bed 2 Boat Trailer w/ 2nd Tier

(No reviews yet) Write a Review
MSRP: $1,799.00
(You save $179.90 )
Ships Within 24-48 Hours

Product Overview

The Malone MicroSport LowBed trailer has a modified base fitted with a 2nd Tier Kit. The trailer's bottom load bar supports have been redesigned to extensively lower the bar height. 

Now just 22" from the ground, the lower bars make loading and unloading heavy kayaks easier and much safer. These galvanized marine grade trailers can be backed down a boat ramp in order to launch directly into the water. Featuring submersible LED lighting and 78” lower load bars for up to six kayaks. 

The 2nd Tier has a 100 lb. load rating and provides transport for additional gear. The 50” upper load bars provide a comfortable height (58”) to access a cargo box, bike or boat. 

This 800 lb. load rated trailer is DOT and Transport Canada approved. Assembles in approximately three to four hours with standard tools.

Backed by a Five Year Warranty.

All Malone sport trailer are proudly Made in the USA. 


  • Pre-assembled hubs for a clean and simple installation
  • 12" galvanized wheels with marine grade sealed bearings
  • Reinforced steel tongue can transport boats up to 20' in length
  • 78" steel rectangular lower load bars featuring D-Ring tie-downs
  • 50" steel rectangular upper load bars w/ 2nd Tier Kit
  • 11 gauge pre-galvanized steel construction for years of service
  • Five Year Limited Warranty - Made in the USA
  • Optional equipment that can be purchased includes:
    • MPG465 Galvanized Spare Tire with Locking Attachment
    • MPG467 Trailer Tongue Kickstand w/ Wheel
    • MPG479 Trailer Harness Adapter
    • MPG488 Trailer Safety Mast
    • MPG494 Retractable Tongue Kit
    • MPG496 Aluminum Wheel & Diamond Plate Fender Upgrade
    • MPG539 Flood Light (Hard Wired Version)
    • MPG541 Rod Storage Tube
    • MPG542 Flood Light (Magnetic Mount Version)
    • MPG543 Electronic Charging Station
    • MPG544 Double Hitch Kit
    • MPG561 Large Kayak Bunk Kit
    • MPG2100 Bike Rack


  • Load Capacity: 800 lb / 20' canoe or kayak
  • Dimensions: 13' 3" (length)
  • Width (Without crossbars): 55"
  • Frame Width Assembled (Width within Fenders): 40"
  • Weight (Without accessories): 197 lb
  • Frame: Marine grade galvanized steel
  • Hitch: 2" Class II receiver
  • Required Ball Size for Vehicle Attachment: 2"
  • Mounting Height for Ball from Ground: 18"
  • Recommended Tire Pressure: 35 to 40 PSI
  • Tongue Weight (Unloaded): 25 lb
  • Lower Cross Bar Spread (Adjustable): 44" - 63"
  • Height of Upper Cross Bars from Ground: 58"
  • Height of Lower Cross Bars from Ground: 22"

What’s In The Box:

  • (1) LB 2nd Tier w/ Load Bars
  • (2) 12" High Speed Wheels
  • (1) Reinforced Steel Tongue
  • DOT Approved LED Lighting
  • Pre-Tested Electrical System
  • Pre-Fitted Chassis Components
  • (1) Instruction Manual & Registration Documentation
  • Total Shipment: 5 Cartons


(No reviews yet) Write a Review