Product Overview
The Front Runner Jeep Wrangler JK 4 Door (2007-2018) Extreme Roof Rack Kit contains all the components needed to mount the Slimline II cargo carrying rack to a Jeep JKU 4 door. This complete roof rack kit includes the Slimline II tray, the Jeep Extreme Mounting System and a Wind Deflector.
This sophisticated, rugged, high performance, nearly indestructible rack system allows you to quickly remove the Freedom Panels and works with the hard top roof on or with no roof at all.
The Front Runner JK Extreme mounting system is secured to the roll bar with middle and rear brackets. This unobtrusive, high performance, nearly indestructible mounting solution allows you to quickly remove the Freedom Panels and works with the hardtop or with no roof at all. Freedom Panels can be quickly and easily removed with rack in place. The cargo weight is evenly distributed across the roll bars and body of the jeep, placing zero weight or stress on the hardtop itself.
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
Drilling is required for installation.
Front Runner Roof Rack Kits contain installation instructions as well as all the components and hardware needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty.
Available in TWO Models: 1/2 Kit and Full Kit (use drop down menu to select)
What's Included in the 1/2 Kit:
1 x FAJK007 - Jeep Wrangler JK 4 Door Inner Brackets
1 x FAJK008 - Jeep Wrangler JK 4 Door Foot Rails
1 x RRSTJ07 - Slimline II Tray - 1425mm(W) X 1358mm(L)
1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W)
Approximate Installed Weight: 31kg (69lbs)
What's Included in the FULL Kit:
1 x FAJK007 - Jeep Wrangler JK 4 Door Inner Brackets
1 x FAJK008 - Jeep Wrangler JK 4 Door Foot Rails
1 x FAJK009 - Jeep Wrangler JK 2 Door & 4 Door Front Pillar Brackets
1 x RRSTJ12 - Slimline II Tray - 1425mm(W) X 2368mm(L)
Approximate Installed Weight 46kg (101lbs)
Construction:
Black epoxy powder-coated T6 aluminum
3CR12 Stainless Steel
NOTE:
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
